Repairing the Strap on Engineer Boots

Repairing the Strap on Engineer Boots

27 January 2024

The item you brought in this time was a pair of “OLD JOE” engineer’s boots.

Although they’re from a fashion brand, these boots are very well made.

There doesn’t seem to be a problem from this angle, but if you look at the outside of the left foot…

 

Both the top and bottom straps have come loose.

 

 

The top section is missing from the base, including the buckle.

 

 

The one at the bottom has also snapped because it couldn’t withstand the strain.

 

This time, in addition to the two strap belt repairs mentioned above,

 

We’ll repair it, including replacing the heel cap.

 

Let’s start with the strap at the top.

 

As the original is missing, we will craft a replacement using vegetable-tanned leather that is similar in thickness, density and texture.

Once you have cut out the materials,

 

We dye the fabric using a mixture of dyes.

 

Although the lighting makes the colour difference appear quite pronounced, the overall feel is actually quite similar.

 

By punching holes for the buckles and processing the areas where the layers have been bonded so that they become thinner,

If you attach it to the upper,

 

The strap shown above is now complete.

 

Next, the lower part as well

 

First, unpick the stitching at the insertion point and remove the remaining section of the broken strap.

 

Apply reinforcing material and leather to the back of these,

 

If you sew it up, it’ll be perfectly strong.

Simply sew it back into its original position, and you’re done.

 

I think it blends in very well, even when viewed up close.

 

The lower part as well

 

As long as the buckle is fastened, it feels almost completely natural.

 

Even if you remove it, about half of the stitching is hidden beneath the counter, so it isn’t particularly noticeable.

 

I replaced the heel with a Coverg heel, and it’s now nice and firm.

 

I think it’s turned out rather well.

Now you can get back to wearing them to your heart’s content.

 

Depending on the type of leather, it can sometimes be difficult to carry out repairs that allow the leather to settle in this well, but

We will do our very best to repair it.

 

If you have any problems with your shoes, please do not hesitate to contact us.

 

Thank you very much.

Aoyama Branch, Yokohama Branch, Shin