
[RED WING] Red Wing Engineer Boots “2268” PT91 Full Sole
[RED WING] Red Wing Engineer Boots “2268” PT91 Full Sole
7 October 2023
- CATEGORY
- MEN'S REPAIR
- Red Wing
- ALL SOLES

Red Wing 2268.
These engineer boots are a favourite amongst many motorcyclists.
This one is also a vintage piece from the 90s.
I forgot to take a photo of the label, but this is the popular PT91.
Occasionally, you’ll come across designations such as PT83, PT91 and PT99
I imagine you’ve seen this before.
To put it simply, it is a standard established by the American National Standards Institute
These are shoes that meet the safety standards for safety footwear.
It is a symbol that means that.
In the case of these PT91 shoes,
‘Met safety standards in 1991’
That, then, is how it stands.

So, were the engineer’s boots of that era used as safety footwear?
Is it popular because it meets safety standards?
That said, that’s not all.
There are a number of features to be found in this PT91, but
One such example is ‘Chashin’.
To put it simply, this is also…
Without dyeing the brown leather black right through to the core
Leather that has been dyed black on the surface only.
The way it turns brown as you wear it
This, too, is a rather understated ageing process.

The other is in the shaft.
Compared to the current 2268, the PT91 has a thinner shaft and
It has a beautiful silhouette.
On the other hand, I suppose there are individual differences, but
One drawback is that it can be a bit of a faff to put on and take off…
I own a PT91 myself, but
When putting them on, use a thin plastic bag as a shoehorn, and
I slip my feet into them, as it were (laughs)
It takes about 20 minutes to get undressed, whilst I’m drenched in sweat,
I’ve even had to pull them off by force on one occasion, haha.
The appeal that makes you want to wear them, even if it’s a bit of a struggle, is
I think this PT91 really packs a punch.

I’ve digressed a bit, but now we’ll get to the main point.
This time, the item was brought in for sole repairs.


The pattern on the front part of the sole has worn away
Some of the outer stitching is also worn through.


The top piece is also worn down and due for replacement.
This time, it’s the wear and tear on the front section and
As there were signs of wear on the top piece,
Taking all of the above into account, we have decided to carry out a full resole.
Here is the finished result.


The sole used is a classic work boot design
Vibram #700.

They go perfectly with engineer boots.

The chevron-patterned design on the front is
It grips the ground firmly and boasts excellent grip.

The top piece is also a Vibram #700.
As with the front, it features a chevron pattern.

As this is a pattern with minimal texture,
Whilst boasting excellent grip,
Viewed from the side, it looks sleek.


Between the welt and the outsole
We’ve fitted a mid-length leather sole to give it a look closer to the original.


The heel is made by layering leather
Featuring a pitched heel design to cinch in the waist.
The original stacking system uses plastic, and
There is a risk that it may crack as a result of hydrolysis.
For this reason, when carrying out a full sole replacement, we do not use plastic, but rather
We will stack the leather and finish it for you.
By doing so, it becomes like plastic
There is no need to worry about it breaking down through hydrolysis.




On this occasion, we carried out a full resole using Vibram #700.
We also have a wide range of other soles available.
Please do come and see for yourself in-store.
We also stock a wide range of Red Wing
We offer a customisation and repair service.
HereYou can view other examples here, so
Please see also.
If you have any queries,
Please do not hesitate to contact us.
We look forward to welcoming you all.
Thank you very much.
Aoyama Branch Nakata





