
[PARABOOTS] MICHAEL Sole Replacement: MARCHE II → Ridgeway
[PARABOOTS] MICHAEL Sole Replacement: MARCHE II → Ridgeway
25 August 2026
Today, we’re going to look at repairs to Paraboot shoes.
The item you brought in is this ‘MICHAEL’.

Although Paraboot has many popular models,
I imagine many people think, ‘When you think of Paraboot, you think of Michel’.
A characteristic feature of Tyrolean shoes is that they are easy to slip on and off, and
I think one of the reasons for their popularity is that they’re comfortable to wear and don’t feel too tight.
Right then, let’s check the status.
The sole features ‘MARCHE II’.
Not only is it soft and comfortable to wear, but it also seems to wear down slowly – it really is an excellent sole, isn’t it?
From the looks of it, there is still plenty of thickness left.

However, when viewed from the side, the outer edge is quite worn down on one side.

Upon closer inspection, I noticed that the midsole and outsole had also come apart.

The manufacturing method used for this model is known as the Norwegian method.
Put simply, the difference from the Goodyear construction lies in the way the welt is stitched down, but I shall not go into that here.
Michael sewed the welt to the midsole, and
The design features a Marche 2 sole attached to the underside using adhesive.
In this case, the unstitched adhesive layer has started to peel away, hasn’t it?
It is possible to re-glue the sole, but as well as the uneven wear being quite noticeable, the heel is also starting to wear down.

This time, we’ve decided to resolve the issue by replacing the sole.
As there are signs of colour fading and dryness on the upper, we will carry out leather care and colour restoration by polishing.

When replacing the sole, the first step is to decide which sole to use.
With so many options to choose from, it can be a bit of a dilemma, but I’ve recommended two types this time.
The first is the ‘Vibram #2070 TRENTO (Trento sole)’.
Taking into account the appearance and the quality of the rubber, I’d recommend the Trent Sole for Michael.
Although they are slightly thicker than the original, the method of attaching the sole and the pattern are similar to the original, so,
You can achieve a seamless finish.

The second is the ‘Ridgeway Sole’.
If anything, it gives the impression of being closer to the sole of the Chambord than that of the Michael, but,
This sole also works well with Michael.
Although the sole is thinner than the original, it is still thick enough to be stitched, so
This helps to minimise the risk of the bonded sections coming apart, as has happened on this occasion.
Furthermore, as the pattern in the centre has a good deal of depth,
It is by no means a sole that wears out quickly.

Of these two options, you chose the Ridgeway sole.
After all, as the stitching extends right down to the outsole, the shoe can be secured without relying solely on adhesive, which means that,
The fact that it minimises the risk of peeling was the deciding factor.
Well then, please take a look at the finished result.

It does seem that I get on well with Michael after all.
The pattern has fitted together neatly, resulting in a finish that looks completely natural.
As we have carefully stitched right through to the outsole this time,
This also significantly reduces the risk of the sole coming away.
Leather has been used for the midsole.

The original model features a rubber midsole, chosen to ensure good adhesion to the outsole, but
For this design, we have opted for a leather midsole, taking into account the overall look and the balance with the stacked leather heel.
Furthermore, the heel balance is adjusted using a leather shank.
The addition of leather really adds a touch of luxury to the footwear, doesn’t it?

The upper was also treated with a colour-restoring and leather-preserving solution, restoring its supple texture whilst allowing the colour to set.

I think it’s turned out rather well, whilst still retaining that typical Michael vibe, don’t you think?

Please do feel free to contact us regarding sole replacement and maintenance for your Paraboot shoes.
We look forward to welcoming you all.
Thank you for reading to the end.
Yokohama Branch, Yamada






