[ALDEN] CAPE COD COLLECTION Moccasin Shoes – Welt Sole Replacement

[ALDEN] CAPE COD COLLECTION Moccasin Shoes – Welt Sole Replacement

19 June 2026

Today, I’d like to introduce ALDEN’s moccasin shoes.

If you look at the insole, you’ll see the words ‘CAPE COD COLLECTION’.

I understand that this series was marketed as part of Alden’s casual range from the 1990s through to the 2000s.

Unlike the regular line, this was located in the New England region of the north-eastern United States,

It was manufactured at a factory specialising in moccasins, which no longer exists.

Furthermore, it is said that this model was never released in Japan, making it an extremely rare pair.

It is clear that the owner took great care of these shoes; the upper has been meticulously looked after and remains in excellent condition.

The sole features a three-layer construction comprising the welt, leather midsole and outsole.

 

The outsole features a Vibram Gum-Lite sole.

Vibram Gumlite

 

There is some wear on the heel, but it does not need replacing straight away and should be fine for a little while longer.

It is possible that only the outsole has been replaced at some point in the past.

Although the outsole itself still had plenty of thickness left,

Upon inspecting the welt, cracks caused by ageing were observed.

What’s more, the deterioration is not confined to a single spot but extends to several places.

 

To resolve a cracked welt at its root, the welt will need to be replaced.

Furthermore, as the sole must be removed when replacing the welt, we will carry out a sole replacement at the same time.

Although this will involve a relatively major repair, the owner has asked us to ‘make sure it’s properly fixed whilst we’re at it’, so,

We have carried out a full repair, completely renewing the shoe from the welt to the outsole.

Well then, please take a look at the finished result.

 

Just like the original, it has been reconstructed using a three-layer structure comprising the welt, leather midsole and outsole.

 

Upon checking, I found that even in the standard specification, Gum Light soles were used, so,

We have once again used the same Vibram Gum-Lite sole.

 

The heel has regained its thickness, and its sleek appearance has returned.

 

And, as you can see, here is the all-important welt.

The original featured a welt made from Nampou (a material formed by compressing and moulding leather powder), but

This time, we replaced the welt with genuine leather.

As a result, both durability and strength have been improved whilst retaining an appearance close to the original.

 

Wouldn’t you say the result is ideal: it retains the original’s charm whilst being even more robust in practical terms?

If you are considering repairs or maintenance, please do not hesitate to contact us.

Thank you for reading to the end.

Yokohama Branch, Yamada