[GRUKHA] No. 5: Handle Replacement, Handle Fabrication, Piping Repair

[GRUKHA] No. 5: Handle Replacement, Handle Fabrication, Piping Repair

2 July 2026

Today, we’d like to introduce our bag repair service for GRUKHA.

We have previously featured repairs for this brand, but this time we have received a request for a different model.

[GHURKA] Tote Bag – Piping Repair – Mini Tote

 

The ‘No. 5 Examiner’ is GRUKHA’s iconic briefcase.

In addition to its universal design, its high level of practicality—which allows it to be used as a shoulder bag by attaching the included strap—is what makes it so appealing,

Isn’t that one of the reasons why it’s so popular with so many people?

There are three main areas to be repaired on this occasion.

 

1. Piping on both sides

Signs of deterioration are particularly evident at the top and bottom corners.

   

 

2. The zip section

There was nothing wrong with the sliders or the tape itself, but the leather pull tab was starting to fray due to wear and tear.

 

Furthermore, due to many years of use, the connection between the slider and the pull-handle has worn out, causing the pull-handle to become stuck at a 90-degree angle.

It had become difficult to open and close.

 

3. Handle

The leather has hardened due to ageing, and cracks have appeared in places.

This time, we will be carrying out repairs on all three of the above areas.

 

We’ll start by working on the pipework.

Here is what it looks like with both removed.

 

Next, attach the new leather, cut into strips, and mark out the stitching lines.

I will re-stitch along the edge.

Once you have re-sewn both sides and trimmed the excess leather, the piping repair is complete.

 

Next, we’ll move on to repairing the zip.

This time, we will be replacing the sliders and making new pull handles.

We will make the pull tab from new leather and secure it to a brand-new slider using rivets.

 

Remove the old slider and thread the newly made slider onto the zip tape.

 

The leather at the end, which had been unstitched to replace the slider, has now been restitched and the repair is complete.

 

Finally, we’ll repair the handle.

First, remove them one by one from the main body, unpick the stitching and peel the leather away from the core material.

 

After re-wrapping the core with new leather, we will restitch it and refinish the edges.

The metal fittings on the rebuilt handle are secured with rivets.

We carried out the same work on both tyres, and the handlebar repairs are now complete.

All the repairs you requested have now been completed.

 

Here is the finished result.

[Piping]

 

[Sliders and Pulls]

 

[Handle]

 

It’s turned out really beautifully.

 

The appearance remains virtually unchanged, and the item is now in a condition that allows you to continue using it with confidence.

 

At Union Works, we offer repair services not only for shoes but also for bags and leather accessories.

If you have any problems, please do not hesitate to contact us.

 

Thank you for reading to the end.

 

Yokohama Branch, Yamada