Tricker’s Repairs (Part 2)

Tricker’s Repairs (Part 2)

9 July 2019

*Please note that all our shops are closed every Wednesday.

Continuing from yesterday, I’m repairing my personal pair of Trickers.

I finished fitting the soles yesterday, so I’ll start by attaching the heels☆

IMG_8370_20190702222110ea4.jpg

The heel top piece is fitted with a Vibram #430 heel to match the sole, but as I wish to raise the heel slightly, I will add a layer of leather.

IMG_8373.jpg

Trim the stacked pieces with a grinder

Depending on the material, we use a grinder to grind it down or a cutter to cut it, selecting the appropriate tools and machinery for the job.

IMG_8378.jpg

Once you’ve trimmed it, secure it firmly with a long screw nail☆

As the nails will be driven right through to the insole, please remove the insole beforehand.

IMG_8313.jpgIMG_8319.jpg

Vibram #430 heel on the top piece

Originally, there was a recessed area (where the bonding surface was slightly indented), as shown on the left; however, as it was to be affixed on top of the layered leather, we sanded down the recess to make the surface flat.

IMG_8379.jpgIMG_8381.jpgIMG_8388.jpg

Apply glue to both the stacked sections and the top piece, then bond them together

IMG_8387.jpg

#430 As the heel already has pre-drilled holes for the nails, drive a nail into each one.

IMG_8393_2019070422200363b.jpg 

Once the heel is securely fixed in place, use a grinder to finish the entire edge whilst trimming away the excess top piece.

As I was using a self-timer with a tripod, I couldn’t manage to take many decent photos, but this is where I get to show off my skills☆

When I first started using the grinder, it would bounce around, so I couldn’t grind smoothly.
It’s a difficult task that requires skilled craftsmanship☆

IMG_8401.jpg

Apply ink to the edge

IMG_8403.jpg

Finish with wax
Applying wax as well as ink gives it a lovely texture☆

So, the full resole is finally finished!! It’s taken ages, hasn’t it? (lol)

Whilst I’m at it, I’ll replace the torn pull-tab as well.

IMG_8409.jpg

Carefully unpick the stitching, taking care not to damage the leather, and remove the original pull tab.

IMG_8412.jpg

Tricker’s genuine pull-top caps are available in three colours: black, dark brown and white☆

IMG_8413.jpgIMG_8415.jpg

Fit the new pull-tab and resew it using a flat-seam stitch.

The Hachō sewing machine is a hand-cranked machine; it sews carefully, stitch by stitch, following the original stitch holes☆

IMG_8416.jpg

A crisp, satisfying pull-tab – it feels lovely, doesn’t it? ☆

IMG_8420_201907022233139d6.jpg 

It’s finally time for the finishing touches: polishing☆

I used Saphir Noir Medium Brown for the polish.

IMG_8422_201907022233159a9.jpg 

The leather, which had been completely neglected and had become really dry and rough, soaks up the cream really well☆

IMG_8425.jpg

Finally, thread in the new shoelaces, and that’s it—all done! ☆☆☆

Of course, the laces are genuine Tricker’s too☆

IMG_8426.jpgIMG_8427.jpgIMG_8428_201907022227079da.jpgIMG_8429.jpg

I must say, I’m quite pleased with how they’ve turned out; as the #430 has a thick sole, it goes really well with country boots☆

IMG_8433.jpgIMG_8449.jpg IMG_8452.jpg 

I put them on straight away and gave them a go for a few days☆

I was wondering if the heels might be a bit too high, but they’re actually really comfortable and feel just right☆

・Full sole, Vibram #430 double sole: from ¥18,360

・Pull-top replacement (one leg): from ¥2,160

・Manicure: from ¥1,080

・Tricker’s Genuine Shoelaces, 70 cm (for country shoes): ¥1,296
               120 cm (for country boots): ¥1,620
               150 cm (for monkey boots): ¥1,620

For the month of July only, we are offering free return postage to customers who have registered with us.
*For further details, please see here →http://unionworks.blog118.fc2.com/blog-entry-2701.htmlIf you haven’t registered as a customer yet,HereYou can register here.
*We will send a direct mailer containing special offers to those who register by 25 July, around the time of the Obon festival in August.

I imagine there are many of you who are too busy to visit our shop.

We are also more than happy to accept shoes sent directly to our factory for repair.


Repairs by post:
https://www.union-works.co.jp/order/

Repair Menu:http://unionworksrepair.com/#!/ 

Online shopping:https://unionworks.stores.jp/#!/

Thank you very much☆

Morita Factory