
[RED WING] BECKMAN: Toe Repair and Hook Replacement
[RED WING] BECKMAN: Toe Repair and Hook Replacement
6 August 2026
- CATEGORY
- Repair materials
- Red Wing
- SPECIAL
Today, we’re going to look at the repair of a pair of Red Wing ‘Beckman’ boots.
It had been discontinued for a while, but it made a long-awaited comeback a few years ago, didn’t it?
A popular Red Wing model that needs no introduction, and the brand’s iconic classic boot.
I imagine many of you were delighted when you heard the news of the reissue.
I was one of them myself.
First of all, we will check the condition of the Beckman you have brought in.

It must be well looked after on a regular basis.
The upper is in very good condition.
Both the sole and the heel are still sufficiently thick, so there is no need to replace the shoe as a whole.
Furthermore, as there are no signs of repair, it may be a relatively new specimen produced following the reissue.

However, on closer inspection of the toe area, it was clear that this section in particular had suffered significant wear and tear.

Looking at it from the side, you can see that the outseam has been severed by the wear, creating a gap between it and the sole.

In this instalment, we’ll be repairing this toe area.
This is how it looks after the repair.

Rubber was added to the worn areas to restore sufficient thickness.
I then re-sewed the topstitching to match the original stitching lines.
The gaps have been filled in thoroughly, resulting in a natural finish.


For out-stitching, rather than simply sewing over the broken thread, we carefully unpick the existing stitching before sewing a new one.
As a result, the seams are neatly aligned.

It looks very natural, doesn’t it?

Actually, we received a request to repair another pair of Beckman shoes on that day, so I’d like to introduce those as well.
You brought in a brand-new Beckman.
The request is to replace the hook at the top of the eyelet.
As fans of Red Wing may already know, the original hooks have a ‘chrysanthemum-cut’ pattern on the reverse side.
The eyelets are also fitted using a chrysanthemum-style cut, but the hooks tend to protrude more.
Consequently, as this part continues to rub against the tongue, friction occurs, and it is not uncommon for the tongue to eventually tear.

Whilst there are individual variations, I get the impression that damage to the tongue is more likely to occur, particularly with specimens where the hook protrudes significantly.

On this occasion, the customer requested preventative maintenance whilst the item was still brand new.
Simply replacing the hook is not a sufficient measure, so,
This time, we have also changed the fitting method to reduce the strain on the tongue.
This is how it looks after the replacement.

We use hooks that are slightly larger than the original ones.
As this hook is the type that is secured at the back with a washer,
It has fewer protrusions or rough edges, such as those found on chrysanthemum-patterned blades, which helps to minimise damage to the tang.

Even when you actually thread the laces through, they look almost completely natural and don’t look out of place at all.


I think it’s turned out really well, striking a good balance between functionality and appearance.
Of course, I fully understand that you wish to preserve the original atmosphere.
For customers such as these, we also stock genuine Red Wing hooks.
Please feel free to contact us if you’d like to change the colour or if a hook has come loose.

Please note that, as with the original, the genuine hooks are fitted using a chrysanthemum-cut method.
If you are considering having your Beckmann repaired or customised, please do not hesitate to contact us.
We look forward to welcoming you all.
Thank you for reading to the end.
Yokohama Branch, Yamada





