J.M. WESTON Sole Replacement

J.M. WESTON Sole Replacement

2 March 2022

Today, Wednesday

All Union Works branches are closed today.

Please take care, those of you who were planning to visit.

 

With prices continuing to rise these days, there is no end to the number of manufacturers raising their prices for shoes.

This is inevitable, given factors such as soaring raw material prices, the need to secure labour, and rising transport costs.

The same applies to shoe repair shops.

*There are currently no plans to increase prices.

 

We take great care not only with the technical aspects but also with the materials we use for repairs.

We only use products that we have thoroughly tested ourselves and are fully satisfied with, and

We use high-quality materials even in areas that are not visible from the outside.

It’s hard to put into words, but you’ll start to notice the difference the more you wear them.

 

I imagine many people regard our company as a relatively expensive repair shop.

However, in light of the above, I personally do not consider it to be expensive at all.

*Please note that this is merely the opinion of one member of staff.

I think replacing the soles—particularly on leather-soled shoes—is a prime example of this.

 

However, I completely understand that customers want to keep costs down as much as possible.

 

We would therefore like to propose the following repair.

 

J.M. WESTON 180 SIGNATURE LOAFER

A masterpiece that needs no introduction

This one went up in price on 1 March as well, didn’t it?

Over the last few days, we have received a great many brand-new Weston items, which has reaffirmed Weston’s popularity.

 

If you look at the sole, you’ll see there’s a hole in it.

Whilst it is possible to cover this area with a half-sole, we recommend replacing the sole.

The toes and heels are filed to just the right degree

We’ll replace the whole thing.

 

First, I shall explain the specifications of Weston’s leather soles.

These leather soles feature a design known as a ‘hidden channel’.

Leather All Soles Plan C

Make a diagonal cut along the red line and peel back the thin leather.

Next, we’ll sew the area where the thin leather has been peeled back to the welt.

We use a technique whereby we glue the thin leather back into its original position so as to conceal the thread used to secure it at the end.

Whilst the ‘hidden channel’ technique usually involves making an incision at the edge of the sole and turning back a thin strip of leather, Weston makes the incision about 4 millimetres inwards from the edge of the sole and turns back the thin strip of leather from there.

Consequently, a distinctive feature of the sole is the cut-out that runs all the way round, slightly inside the edge.

 

Another distinctive feature is the size marking on the waistband.

The circle on the left shows the size.

The one on the right is the ‘Wise’.

This is marked ‘6-D’.

Weston’s half sizes are denoted by ‘-’ rather than ‘H’.

 

Flat edges have been used.

Whilst it is possible to reproduce the original specifications as described above and finish the piece accordingly,

This time, we aimed to reproduce the original as faithfully as possible whilst keeping costs down.

At first glance, it looks like a Weston-style hidden channel, but,

This one does not have the thin leather turned up.

Put simply, it is a variant of the ‘open channel’ specification.

Leather All Soles Plan B

With an open-channel construction, grooves are cut into the sole and stitching is applied within those grooves.

This design is known as a ‘knife-cut’ stitch; as the name suggests, it gives the sole the appearance of having been cut with a knife. It is a feature commonly seen on Crockett & Jones welts, for example.

 

Whereas the former has visible stitching inside the groove, the latter is characterised by the stitching being hidden within the cut, making it difficult to see.

This gives it a more elegant look than the oven channel.

 

To be honest, the finish isn’t quite as neat as that of the Hidden Channel.

However, as it significantly improves work efficiency, it helps to keep production costs down, and

At first glance, it looks very similar to the original, so if you’re not too fussy about the original specifications, I think this one will do just fine.

We’ve also re-engraved the waist, so,

Even if the size markings on the lining have faded and become illegible, you can still check them here, can’t you?

 

The sides have also been re-finished with a flat edge, and 

The heel height and finish are back to normal.

We have fitted steel toe caps, so you can wear them with confidence.

A final polish, and it’s finished.  

 

To be honest, it is possible to keep prices down by using cheaper materials.

However, that would be contrary to our company’s pride.

 

With the motto [‘The finest ingredients and the finest craftsmanship’],

We look forward to continuing to offer proposals that are tailored to our customers’ needs.

 

We look forward to welcoming you.

 

Thank you very much for staying with us until the end.

 

Aoyama Branch, Yokohama Branch, Yamada