
[Red Wing] Red Wing Engineer Boots – Midsole Reinforcement, Heel Replacement – Vibram #430 Heels
[Red Wing] Red Wing Engineer Boots – Midsole Reinforcement, Heel Replacement – Vibram #430 Heels
29 October 2025
- CATEGORY
- MEN'S REPAIR
- Red Wing

The item we’re repairing this time is a pair of Red Wing engineer’s boots.

Since the pandemic, various Red Wing models have disappeared from the official range.
Engineer boots were also one of the models that were discontinued, but
The other day, the official channel announced the welcome news that the engineer boots are making a comeback, didn’t they?
What you’ve brought with you today is

Boots labelled ‘PT91’ that are popular on the vintage market.

The sole is the original; only the top piece has been replaced.

Perhaps because I’ve only just had them replaced, the heels haven’t worn down at all, but

The heel had come away from the base, along with the sole.

As you can see, the nail has come loose whilst still stuck in the wood.
In fact, this issue is commonly seen in vintage engineer’s boots such as the PT91 and 99.

Remove the insole to identify the cause.

This might be a bit difficult to understand, but

The leather on the midsole, where the foot rests, is cracked all over.
The mid-soles from that era weren’t made from particularly high-quality materials, and now that some time has passed,
Over the past few years, we have seen a growing number of cases where the insole has cracked due to wear and tear, causing the nails to come loose.
As the insole has cracked completely, the repair cannot be carried out without re-nailing the sole and heel in place, so

High-hardness plates

Shape it into a heel.

Rivet this to the sole

First, secure the sole firmly in place.

Secure them in place in the following order: the heel base, then the top piece.

The top piece features the same Vibram #430 heel as when you brought it in.
Although only the area around the heel was cracked this time, there is a risk that the toe area may also crack in the future.

We therefore line the shoe with new leather from heel to toe.

Put the original half-socks back on, and you’re done.

As the midsole has also been reinforced, I think you’ll be able to wear them for quite some time yet.
As well as the Red Wing boots featured here, we also repair other work boots.
If you have any issues with your boots, please do not hesitate to contact us.
Benchmark Funayama






