
[Tricker’s] Tricker’s “BOURTON” – Full Sole & Vintage Steel
[Tricker’s] Tricker’s “BOURTON” – Full Sole & Vintage Steel
26 January 2024
- CATEGORY
- MEN'S REPAIR
- Tricker's

The Burton, a classic model from Tricker’s.

It is an iconic figure that is indispensable when discussing the brand.

You brought these in because you were concerned about the condition of the soles.
The sole is worn down all over, and

Although the toe area has previously been reinforced with leather,
It is badly worn and starting to peel off.


We also noticed some areas where the outer stitching had worn through.


The top piece is badly worn
The stacked section has also become worn down.
By reinforcing the toe area and replacing the top piece,
It looks as though you’ll be able to wear them again, though
This time, at the owner’s request, we’ve decided to carry out a full resole.
Here is the finished result.

The sole used was a leather sole.

It has been finished in the same colour as the original sole.

Vintage steel is used on the toe area, which is prone to wear and tear.
By carrying out this reinforcement, wear and tear on the toe area will be
It can be significantly reduced.

The vintage steel I fitted is
So that it is not obvious it is fitted when viewed from the side
By blending it into the edges to finish the look,
You’ll find them comfortable to wear, with no sense of discomfort.

The top piece is from the original Top Piece Hi
Specification changed to dovetail.

As the material is thicker than that of the original top piece,
This can reduce the frequency with which the top piece needs to be replaced.

Having the soles completely replaced has really spruced them up, hasn’t it?

This time, we carried out a full resole on a pair of Tricker’s Burton shoes.
To the leather sole, to recreate the original
It is also possible to have the soles completely replaced, and
Such as Dainite soles and Command soles,
It is also possible to have them customised with rubber soles.
Please do give it some thought.
If you have any queries,
Please do not hesitate to contact us.
We look forward to welcoming you all.
Thank you very much.
Aoyama Branch Nakata



