
[Tricker’s] Tricker’s “STOW” Country Boots – Half-rubber sole, vintage steel shank and Dainite heel
[Tricker’s] Tricker’s “STOW” Country Boots – Half-rubber sole, vintage steel shank and Dainite heel
19 November 2023
- CATEGORY
- MEN'S REPAIR
- Tricker's

Tricker’s country boots.
This pair really needs no introduction.

You brought these in because you were concerned about the wear on the soles.
You were worried about whether a full sole replacement was necessary.

If there is a hole in the sole,
It’s quite easy to understand when to have the sole replaced, but
It’s hard to tell if there aren’t any holes, isn’t it?

Feeling the unevenness of the ground whilst walking, or
If you press the sole with your finger, it makes a squelching sound, or
With rubber soles, the tread wears down and
If it has worn away, this is a sign that the sole has become thin.
Even if there are no holes, it might be worth considering a full resole.
In this instance, whilst there are signs of wear,
In this condition, a full resole is not yet necessary.
Should I just carry on wearing them as they are and have them fully re-soled when the time comes?
Reinforced with a half rubber sole,
From now on, rather than having the entire sole replaced, I’ll just have the half-rubber sole replaced,
Options include, for example, designing them to be worn as they are.

It’s time to replace the top piece.


The leather section of the stacked design has also become worn.


The toes are worn down to near the midsole.
As the sole is quite thick, it is bound to wear down quite easily.
On this occasion, after consulting with the owner,
We have decided to carry out the repair without replacing the entire sole.
Here is the finished result.


We have reinforced the front section with a half-rubber sole.
Apparently, it can sometimes slip whilst walking,
We received a request to make it less slippery.
Whilst it is possible to have a full resole carried out on Dainite soles and the like,
As the sole was still quite thick,
We have fitted a half rubber sole to make it more slip-resistant.

The toe area, which is prone to wear and tear, is reinforced with vintage steel.


So that the vintage steel isn’t visible from the side
I’m applying wax to the edges and working it in.

It can be combined with a half-rubber sole and
A half-rubber sole extending from the toe...
It can also prevent the material from peeling off.

If you’re having a half-rubber sole fitted,
We recommend pairing it with Vintage Steel.



The upper features a Dainite heel.
The textured Dainite rubber heel is
Offering superior durability and grip compared to the original heel,
You can wear them as much as you like without worrying about them slipping.

This is what the side view looks like.
The edges, which showed signs of wear, were tidied up all round
We’ve applied wax to give it a beautiful finish.


At the owner’s request, a half-rubber sole and
The sides of the Dainite heels are
We have deliberately chosen to finish it without applying any wax.

This time, the front section features a half-rubber sole and
Reinforced with vintage steel
I have replaced the top piece with a Dainite heel.
Is it time for a full sole replacement?
I suppose there may be times when you don’t understand.
If that’s the case, please do pop into the shop.
Even after many years of wear, without having the soles completely replaced,
In some cases, the shoes may be wearable again after a partial repair.
If you have any queries,
Please do not hesitate to contact us.
We look forward to welcoming you all.
Thank you very much.
Aoyama Branch Nakata


