Buckle Replacement and Strap Alterations

Buckle Replacement and Strap Alterations

12 July 2023

I hear that today, 12 July, is ‘Comprehensive Health Check-up Day’.

On 12 July 1954, at the National Tokyo First Hospital,

I understand that a commemorative day has been established to mark the occasion of the first ‘human health check-up’ to be carried out in Japan.

Our company’s annual health check-ups are usually held around this time of year.

I wonder if most companies tend to hold this sort of event around this time of year.

I hope to stay healthy for as long as possible.

 

Enough of that aside, here’s another lively update on our repairs today.

 

Today, I’d like to show you a little customisation.

The item I’m going to customise is this monk-strap chukka boot.

 

When the shoes were brought in, the soles already had Vibram half-rubber and a top lift fitted, and

It has been customised to specifications that differ from the original.

Vibram Tank Half Rubber Soles

Vibram Tank Lite

 

The request we received was for a customised upper.

 

We will alter the shape of the buckle and the tip of the strap.

 

Let’s start with the buckle.

The original has a silver square buckle.

 

I’ll change it to a slightly rounded gold buckle.

*Please note that the buckle you require may not always be available.

 

Unpick the stitching and remove the buckle, along with the elastic.

 

Although the rubber was reusable, I thought I’d make the most of the opportunity and replace this one with a new one as well.

With the original type of rubber,

The area through which the buckle’s pin passes often starts to fray and come apart.

 

This time, we’ll be using this type of rubber, known as ‘Biragomu’.

 

In the centre of the rubber, there are countless tiny, colourless, plastic-like objects arranged, and,

It is designed to allow the mandrel to be inserted easily from any position.

 

This is what it looks like when you thread it through the buckle.

 

I’ll put this back in its original position and re-sew it.

Yeah, it’s turned out rather well.

 

 

Next, we’ll machine the tip of the blade.

The original strap has a pointed end on one side.

 

The customer’s request was to make it shorter and to give this pointed-in-the-middle style a slightly rounded shape.

 

Once you have reshaped the tip of the blade, re-stitch it.

As I was told to use the third hole from the tip of the blade, I adjusted the length to fit the third hole.

This one turned out well too.

 

The length of the strap looks just right, doesn’t it?

 

Now that I’ve finished the other leg, it’s complete.

 

The atmosphere has changed, hasn’t it?

A pair of wonderful shoes, the only ones of their kind in the world, has been completed.

 

We look forward to welcoming you.

 

Thank you very much for staying with us until the end.

 

Yamada