As summer approaches, we’re seeing an increase in requests for sandal repairs.
Have you all got ready for summer yet?
In this post, we’ll be showcasing a few examples of leather sandal repairs.
First of all, take a look at this

Thong sandals with a heel strap.
Like the Jutta Neumann model, the footbed and sole are riveted together.

Originally, they had leather soles, but as the wearer was concerned about them being slippery and the soles wearing down, we decided to cover the entire sole with a layer of half-rubber.
Here is the finished result.



As the surface features fine ridges and grooves, it offers significantly better grip than leather soles, whilst

As the material is thin, the edges look perfectly natural.
If you don’t want to alter the look of the original, we recommend this one.
Next, take a look at this

This is Giacometti’s masterpiece, the ‘Gurkha Sandal’.
It seems I’d been wearing them barefoot, so I’ve replaced the worn-out lining and the elastic that secures the buckle.

If you wear them barefoot, the lining will inevitably become damaged due to the effects of sweat.
We reinforced the areas that were completely worn out using leather of a similar type.

Furthermore, the monk strap—which is frequently handled—is also prone to wear and tear.
This has also been reinforced with a patch of leather.
Its strength has increased significantly.

And then there’s the rubber part—the number one spot prone to damage.
If the elastic is completely stretched out, your foot won’t be held in place and it will slip about inside the shoe.
If you walk whilst bracing yourself to prevent your feet from moving, you may strain the muscles in the soles of your feet or your shins, so we recommend alternating your stance from time to time.
I’ve replaced this one as well, so the grip has been restored.
This will ensure you can wear them in complete comfort.
And finally, this one.

Jutta Neumann’s classic model, ”ALICE”.
This range includes models with leather soles and models with Birkenstocks soles.
The sandals you brought with you were the latter.
When you brought them in, the Birkenstocks’ soles were quite worn, so we replaced them with new ones in accordance with the original specifications.
Here is the finished result.

As it uses the same Birken sole as the original, the finish feels completely natural.

The edges are spot on too.
It has been shaped to follow the contour of the arch of the foot and is affixed accordingly.

We offer two types of Birkenソール: 10mm and 7mm thick.
The standard width for Jutta Originals is 10 mm.
If you feel it’s a bit too thick, we can make it a little thinner.

It is available in black, brown and white.
Please choose whichever you prefer♪
In this post, we’ve shown you how we repaired three pairs of sandals.
Before summer really gets underway, why not have another look at the sandals you already own?
It might be in worse condition than I thought.
Get your sandals serviced whilst we’re still in the middle of the rainy season
Why not welcome the summer in style?☆
Thank you very much.
Yokohama Branch, Shin
