
Western Boots: Sole Replacement
Western Boots: Sole Replacement
28 February 2023
It’s the last day of February. I wonder if most people are at work today.
As for me, as I’m off work today, I’m thinking of popping off to the sauna.
Speaking of saunas, I actually tried some CBD oil designed for use in saunas the other day.
CBD oil for use in saunas helps to regulate the autonomic nervous system, and
It’s said to offer an even greater sense of relaxation.
As for the results of my trial… ‘It’s absolutely brilliant!’
I was so relaxed that I ended up drooling whilst enjoying the fresh air, haha.
If you’re interested, please do give it a go.
That’s all on the subject of saunas; now let’s get to the main point.
Here is an overview of our repair services.
Let me introduce these Western boots.

The upper also looks to be in good condition overall, and,

The sole has already been reinforced, so it is not yet time to replace it.

The issue in question this time is that they make a squeaking noise when worn.
It’s what’s known as ‘rattling’.
It is difficult to pinpoint a clear cause for the noise, and
The approach involves eliminating possibilities one by one, starting with the most likely ones.
Friction between the core material and the upper, between the insole and the midsole, and between the outsole and the cork, etc.,
There are various reasons for this.
In this case,
Based on what the customer told us and our assessment after they tried them on in-store,
We have concluded that this is most likely due to a shank fracture.
We’ll replace the sole and fit a new shank.
A characteristic of the soles of Western boots is that
The waist section of the sole is often secured with wooden pegs.

It looks as though both wooden and iron nails have been used in these boots.
The outside is made of iron, whilst the inside is made of wooden pegs, isn’t it?
It makes sense, as it increases strength.

Apply an outseam stitch from the instep onwards, and secure the waist with tacks.

This helps to minimise the protrusion of the sole, and
You can create a lovely curve from the ball joint down to the waist.


Come to think of it, when it comes to Western boots, many of them do have distinctive heels, don’t they?
These boots are also quite distinctive.
A slightly higher heel height, with a sharp, tapered silhouette.

Taking the above points into account, I replaced the sole.
Here is the finished result.

The elegant line running from the ball joint to the waist.

I took the waist in as much as I possibly could.

Nails are, of course, used in the waist section of the sole.
It may not be obvious, but we have used a combination of wooden and iron nails, just as in the original.

I’ve made the heel taller and given it a fairly sharp taper.
We have also recreated this one faithfully.



I’ve also had half-sole rubber fitted, so I’ll be able to wear these for a long time by just replacing that part in future.

I think the result is of a very high standard, don’t you?
As I’ve also replaced the shank properly, the rattling noise should now have been sorted out.
We look forward to welcoming you.
Thank you very much for staying with us until the end.
Aoyama Branch, Yokohama Branch, Yamada
