Sartre’s Repair II

Sartre’s Repair II

24 February 2014

A winter staple: SARTORE’s long boots

Its popularity shows no sign of waning, and it seems to me that the number of repairs is increasing year on year.

P2182074.jpg  

The boots we’re repairing this time are these: long boots in a subtle shade that’s somewhere between brown and grey.

P2182072.jpg 

The metal fitting on the leather handle of the zip has broken.

I didn’t manage to take a photo, but apparently the zip on the other boot is broken, and to make matters worse, the pull tab has gone missing (sob).

P2202098.jpg 

First of all, making a replacement handle for the one that’s gone missing

Find a piece of leather in a similar colour, then use cream to bring the colour closer to the original.

Cut the leather to the same size as the remaining handle, stitch it in place, and attach the new metal fittings – and you’re done! ♪

Although the ‘SARTORE’ engraving has worn off, making the metal fittings look a bit plain, they actually blend in surprisingly well once you’ve attached them to your boots☆

P2202099.jpg 

The one on the right has had the zip replaced, and the handle has also been made from scratch.
(On the left, both the zip and the handle are the originals; only the metal fittings have been replaced with new ones.)

Although the zips originally used on the Sartre were imported, as they were from a manufacturer not stocked by Union Works, we used YKK zips instead.

If you look closely, you’ll notice that the left and right sides are slightly different, but I think they’re quite similar zips☆

P2202101.jpg 

If you take a step back, you can’t really tell the difference between the left and right, can you? ♪

If you can source a zip with a similar look, we recommend replacing just one leg, as we have done here, but,
If the only options available have zips of completely different colours or shapes, we would also recommend replacing both legs as a set.

P2202105.jpg 

We’ve also reinforced the soles of these boots★

This means we can rest easy, not just for the rest of this season, but for next season and beyond too♪

P2202106.jpg 

Although this isn’t a repair, here’s something we’d recommend for long boots

Jet Boots Keeper☆ Made in Germany.

P2202107.jpg 

Of course, the one on the right has a boot keeper in it, whilst the one on the left does not.

If you pop this inside when you’re not wearing them, it will smooth out the creases around the ankle and make your boots last considerably longer.

You can use card or newspaper instead, but this is far more convenient!

I really do recommend it☆

P2202103.jpg 

Sartre boots are excellent; let’s look after them and wear them for a long time, whilst keeping them in good condition through regular maintenance and repairs☆

Replacement of zips on long boots: From ¥7,350 per boot

Zip handle production: From ¥2,100 per leg

Jet Boots Keeper : ¥2,100

A detailed blog about boot keepers

http://unionworks.blog118.fc2.com/blog-entry-184.html

If the sole of my Sartre shoes were to come right off…

http://unionworks.blog118.fc2.com/blog-entry-1429.html

We are also more than happy to accept shoes sent directly to our factory for repair.

Web Repair has been revamped!!

How to Order:http://www.union-works.co.jp/contact/
Web Repair :http://unionworksrepair.com/#!/

(Morita, Factory)