
[TOGA] Repairing a tear in the saddle strap
[TOGA] Repairing a tear in the saddle strap
11 June 2024
- CATEGORY
- INFORMATION
- BLOG
- LADIES REPAIR
Here is the item we’ll be repairing this time


These are TOGA loafers.
These are a striking pair of shoes, aren’t they? The saddle with its metal fittings is very much in keeping with TOGA’s style.
As for the parts that needed repairing,

The saddle on the inside of my right leg has split right down the middle.

In the case of this fault, there are two ways to repair it.
Should I have the saddle remade, or repair the tear and keep the original?
As there are metal fittings attached to the saddle this time, some of them cannot be reused if the saddle is to be remade.
Following consultation with the customer, we have decided to carry out the repairs whilst retaining the original appearance, although it will be slightly noticeable that repairs have been made.

First, undo the stitches that join and secure the saddle, which has been completely severed.

After that, I applied a piece of leather for reinforcement from the back,

Sew a zigzag stitch along the tear to prevent it from opening.

Finally, sew it back into its original position, and you’re done.

It does feel a bit like it’s been repaired, though...

I suppose if you look at it from a distance, it’s not really that noticeable.

As leather has been applied to the inside of the reinforced areas, the shoes may feel slightly tighter than the original pair when worn.
This time,
・The fact that the fittings cannot be reused if the item is to be remade.
・The fit wasn’t actually that tight.
In view of these points, we decided to retain the original design whilst making some improvements, but,
Taking into account the condition of your shoes and how they fit, we will be happy to suggest the best course of action.
Please do feel free to contact us.

Thank you very much.
Shin




