
Glacage on the Medallion Shoes
Glacage on the Medallion Shoes
11 March 2022
- CATEGORY
- INFORMATION
- MEN'S REPAIR
Over the past few years, we have seen an increase in requests for ‘glacage’ (mirror polishing), and I can really sense the growing interest in shoe polishing.
In this context, I often hear that people are having trouble achieving a mirror finish on their Medallion Tu.

So, in this post, I’ll give a brief explanation (in my own words) of the key points involved in mirror-polishing Medallion To.

This time, I’m going to polish these semi-brogue shoes.

First, use a horsehair brush to remove any dust.

Next, remove the old cream.
If you skip this step, the finish will be patchy, so make sure you remove all make-up thoroughly.
(Please do not scrub vigorously, as this will damage the leather.)
Whilst we choose the tools to use depending on the condition of the shoes, at Union Works we generally use Two-Face Lotion.

The one on the right shows the item after the stains have been removed.

After that, apply a fresh layer of cream.
Please ensure you apply the product thinly and evenly to avoid a thick layer.
If you apply too thick a coat, the finish will be sticky and the wax won’t adhere properly.
For black shoes, of course, I use UW’s original cream.

As it contains a high concentration of dye, it is ideal for colour-matching the edges. Apply it at the same time.

Leave it for 5 to 10 minutes to allow the ingredients in the cream to be absorbed, then brush through with a boar-bristle brush.
After brushing, wipe off any excess cream with a cloth.
If it feels smooth to the touch, the pre-treatment is complete.
Right then, let’s finally move on to the glazing stage.
First, let’s start with the base coat.

Divide the cap into three equal sections and vary the amount of wax applied so that it creates a gradient from the toe towards the vamp.
By creating a gradient effect, the transition from the vamp is seamless, resulting in a natural and elegant finish.
If you bear this rule of thirds in mind, you’ll find it easier to create a beautiful gradient, so do give it a go.

In the shop, we use both soft wax and hardened wax.
To put it simply, the process involves using a hard wax to fill the pores and a soft wax for the finishing touch.
(The above is simply to save time; as you can achieve a mirror finish using only the soft wax straight out of the packet, there is no need to prepare two.)
When applying the base, you use your fingers to fill in the pores, but this is one of the stages where it’s easy to go wrong with the Medallion To mirror polish.
I often see shoes with wax embedded in the medallions.
This is probably because too much wax is being applied at once.

Try to resist the urge to fill your pores too quickly; we recommend using about this much wax at a time.
The idea is to apply several thin layers of wax, keeping in mind the three-part division mentioned earlier.

Once you feel that the pores have been filled in to a certain extent, move on to the next step.
(Sorry the photo isn’t very clear...)

Next, we’ll finally start polishing using flannel.
This stage involves dampening the flannel fabric, and I think this is where people are most likely to go wrong.
A common problem people mention is that the wax keeps peeling off as they polish.
This is almost always caused by using too much wax or soaking the flannel fabric in too much water.
In particular, if water seeps into the medallion section, the wax simply won’t adhere, no matter how hard you try.
If the liquid has soaked in, leave it alone until the moisture has dried out.
When polishing Medallionto shoes, we recommend that you take particular care with the amount of water you use.

If you are using a hand wrap, one pump is too much to apply to the flannel.
A half-press or about a third of a press is sufficient.

As a general guide, aim for the flannel fabric to be only slightly damp, rather than wet.

If you don’t have a hand wrap, it’s easier to polish by dripping water onto the surface with your fingers.

This amount of water is plenty.
Please apply it to an area that does not interfere with the medallion.
If you take care not to remove too much wax or use too much water, and gently build up the layers of wax,

A nice mirror finish is starting to take shape.

Now that you’ve got this far, use a goat-hair brush to soften the edges of the three-way division and blend them together.

Finally, using a new flannel cloth, polish the surface to a mirror finish by dampening it with water only—as if you were polishing it—without using any wax.
You mustn’t use too much water here either!
Once the brush marks have disappeared and a beautiful mirror-like finish has been achieved, the job is done.

Left: Before; Right: After

I think it’s turned out to be a rather nice gradient, hasn’t it?
The connection to Vamp feels natural, too.
That concludes the glazing process.
As with any type of shoe, but particularly with Medallion Toe shoes, I believe you’re more likely to achieve a successful result if you take care to pay attention to the ”amount of wax” you use each time and the ”amount of water” you soak into the flannel cloth.
Whether you’ve struggled in the past or are just setting out to give it a go, please do bear these two points in mind as you take on the challenge.
Of course, if you leave it to us, we’ll ensure a perfect finish, so please do get in touch.
Glacage 2,800 + VAT ~ Delivery time: 1 week

We also sell the flannel fabric we use in our work.
This is made from a very comfortable flannel fabric, and is a truly exceptional piece that was created with input from each member of our staff.
We’ve put a great deal of care into the fabric’s thickness, its brushed texture, its softness and its colour, so please do give it a try if you’d like.
UNION WORKS Original / High-Shine Cloth
Pack of 4: ¥1,100 (including tax)
These are available at all Union Works branches, and
Online shop You can also purchase it from here.

What’s more, KIWI WAX is currently on sale at the unbeatable price of 110 yen.
Stock levels are running low, so if you’re interested, please do take this opportunity to make a purchase.
This one tooOnline shopYou can purchase it here.
Thank you very much.
Yokohama Branch, Shin
