Now that we’ve entered November, the weather has finally started to feel like winter.
I can’t wait to wear my coat! Driven by that single thought, I went to work the other day wearing the Chesterfield coat I’d bought for the first time.
Results
…
…
I got a bit ahead of myself. It’s far too hot...
Mostly carried by hand.
Sigh, I can’t wait to wear this without worrying about the heat.
Apart from the coat, something else happened for the first time recently.
I’ve taken on the challenge of replacing the entire sole (hereinafter ‘As’) for the first time in my life.
Here’s what I’ve done this time

My personal 73 LastChet Wynd。
I like them because they have a cotton lining, feel comfortable against my feet and are easy to wear.

As the upper is still in good condition, let’s replace the As and keep it in active service for a while longer.
Under the guidance of our senior colleagues, we started by dismantling the equipment.
Disassemble it into its individual parts: the sole, shank and heel.

A piece of leather known as a ‘headband’ is sandwiched between the heel and the upper, as shown here.

Just look at the number of pegs holding this headband in place.
You can really see the care that Church has put into his work, can’t you?
*When unpicking, be sure to remove all remaining out-stitches thoroughly.
If this is left as it is, it will result in a messy finish when you re-sew it.
Once the shank has been returned to its original position, replace the cork with a new one and shape it to the correct form.
After attaching the sole with adhesive, sew it in place using a sewing machine.
After rough-trimming the edges and shaping them to a certain extent,
After hammering a nail into the heel and lightly sanding down the surface of the sole,
Fit the heel.
Once the edges of the sole and the heel have been neatly trimmed, apply the ink to finish.

Once you’ve got this far, it’s almost finished.
Next, add some colour to the sole and use a hot iron or similar tool to add some intricate detailing…
*We do our utmost to reproduce the original sole design. Please leave the reproduction of British shoes, in particular, to us.
This is how it turned out.

A slight variation in colour is all part of its charm.
As you can see, I’ve managed to bring out the edges of the edges beautifully.

I’m absolutely delighted with how the heels have turned out.

Although I have made shoes from scratch before,
Replacing the sole of a finished pair of shoes is a different matter altogether, and
It was really hard work.
I’ve simplified things quite a bit in this introduction, but,
I hope that has helped you understand the process involved in AS.
For customers who request an As replacement from next time onwards, if you were to imagine the process by which the As was applied,
You might just find yourself growing even more attached to your shoes.
Please note that with regard to your shoes,
Please rest assured that our experienced senior staff will carry out the work with the utmost care.
We look forward to welcoming you to our shop.
(Ginza Branch (Yamada)
