[MONTBLANC] Montblanc Briefcase – Handle Repair

[MONTBLANC] Montblanc Briefcase – Handle Repair

12 July 2026

Today, we’re going to be looking at bag repairs.

The item we have received this time is a MONTBLANC briefcase.

Montblanc is a brand strongly associated with fountain pens, but,

After doing a bit of research, it seems they offer a wide range of products, including bags, watches and perfumes.

I was a little surprised, as I myself had been particularly struck by the writing implements.

This time, we have received a request for handlebar repairs.

This handle features a nylon tape base and a leather grip.

First, let’s check the condition.

As this is the part that comes into contact with the hands most frequently, the finish on the leather’s surface had peeled away, revealing the raw leather beneath.

 

Furthermore, the edge finish has peeled away, and in some places there are visible areas where the leather itself is missing.

 

Furthermore, after many years of use, the leather has stretched, and

As the core material inside had become too short, some warping had also occurred.

Taking the above into account, we decided to retain the nylon tape as it is and replace only the leather sections.

 

Right then, let’s get started.

 

First, we’ll remove the leather section from the nylon tape.

Upon checking, I found that the core material was significantly misaligned on both the left and right sides, and it became clear that this was indeed due to the leather stretching.

Fortunately, we’ve managed to source some leather with a very similar feel, so we’ll be tracing the removed handle onto the new leather.

When tracing, corrections are made whilst taking into account any distortion or damage present in the original handle, as well as any stretching that may have occurred.

 

After that, we moved on to the cutting stage.

After finishing some of the edges in advance, we sew them onto the nylon tape.

Continue sewing whilst wrapping the core material around it.

Finally, finish off this edge and it’s done.

 

Here is the finished result.

With the core material now firmly in place right to the very edge, the entire handle has taken on a remarkably crisp and firm feel.

The texture of the leather is also very similar, giving it a natural finish that looks just like the original.

 

We took great care to trim the edges neatly, ensuring a beautiful finish right down to the finest details.

I think it’s turned out rather well this time too, hasn’t it?

At Union Works, we offer repair services not only for shoes but also for bags and leather accessories.

If you have any problems, please do not hesitate to contact us.

 

Thank you for reading to the end.

 

Yokohama Branch, Yamada