Leather Tote Bag: Replacement of Handle Reinforcement and Repairs

Leather Tote Bag: Replacement of Handle Reinforcement and Repairs

28 April 2026

The item we received today is this leather tote bag.

 

There is some misalignment in the spindle inside the handle.

In terms of construction, two layers of leather are bonded together, with a core rod inserted between them to form the handle,

Flat core material is incorporated into the remaining sections.

This is a relatively common problem with handles of this design.

 

Damage can also be seen at the base of the handle.

In addition to the edge peeling away, it appears that the core material inside has deteriorated and cracked.

 

Today, we will be correcting the misalignment of the handle’s mandrel and replacing the core material.

Right then, let’s get started.

First, unpick the top-line stitching to remove the handle.

Next, we’ll unpick the stitching that secures the handle to the body.

 

Once you have unpicked all the stitches, remove the handle from the main body.

When I peeled back the bonded leather, I noticed damage not only to the core material but also to the core rod, so I decided to replace both.

The original mandrel was made of polyvinyl chloride, but due to ageing, it had become sticky, and

This was one of the causes of the misalignment.

 

Insert a new core material and core rod, then reattach the leather that was peeled away and sew it back in place.

 

Here, we will introduce some measures to prevent a recurrence.

We changed the material of the core rod to a type of leather that bonds well, and furthermore, we sewed the ends of the core rod to the body of the handle to secure it.

The stitching is applied in a place where it cannot be seen.

 

Once you’ve sewn it in place so that it wraps around the core rod, the handle is almost finished.

 

The stitching that secures the core rod is also neatly concealed.

 

Finally, the edges are polished and coloured, and then sewn onto the main body.

 

Once you’ve re-sewn the top-line stitching, the repair will be complete.

 

Here is the finished result.

 

Returning the mandrel to its correct position rectified the distortion, and replacing the core material restored the handle’s firm tension.

 

The edges are also beautifully finished.

 

Furthermore, thanks to the concealed stitching applied to the interior, the design is now such that the mandrel is less likely to shift out of place.

 

I think it’s turned out rather well, hasn’t it?

At Union Works, we not only repair shoes, but also repair bags and leather accessories.
Please do feel free to get in touch.

 

Thank you for reading to the end.

Yokohama Branch, Yamada