
[CROCKETT & JONES] Collar repair, beading repair, heel replacement
[CROCKETT & JONES] Collar repair, beading repair, heel replacement
21 July 2026
- CATEGORY
- Repair materials
- Crockett & Jones
Today, we’d like to showcase some examples of repairs we’ve carried out on Crockett & Jones shoes.
When it comes to Crockett & Jones, they offer ‘a good balance between quality and price, and…’
It is a brand that is often described as offering ‘great value for money’.
Speaking as a cobbler who has seen all manner of shoes, I feel that assessment is absolutely spot on.
Today, we’re going to look at the repair of the ‘ALBION’ semi-brogue Adelaide model.

First, let’s check the condition.
The sole was still thick enough, so there was no need to have the entire sole replaced.

On the other hand, when I looked at the heel, I could see that the wear had extended beyond the top piece and was affecting the layered leather.


Next up is the upper.
Overall, they were in good condition, but there were some issues with the cuffs.
The beading has come undone in places.

The term ‘beading’ as used here refers to the narrow strip of leather sandwiched between the upper and the lining at the top line.
Whilst it does serve to reinforce the top of the shoe, its purpose is, if anything, largely decorative, and
By inserting a single piece of leather between the upper and the lining, a moderate amount of volume is created at the top of the shoe, resulting in a luxurious finish.


Furthermore, signs of wear and tears were also observed on the counter lining.


This time: the heel (top piece), beading and counter lining.
We have repaired the three items listed above.
Well then, please take a look at the finished result.
First up is replacing the top piece.

I used the same dovetail as the original.

Remove the worn top piece, apply a patch to the worn-down layered leather to restore its thickness and even out the outer circumference, and then,
I have fitted a new top piece.


Next up is the beading repair.
We carefully cut away the torn section and finish the repair by inserting a new piece of leather.




Even the damaged areas now look completely natural.
Finally, we’ll carry out repairs to the counter lining.
Leather in a similar shade has been applied to cover the torn area and is securely stitched along the top edge.

Furthermore, to ensure that the boundary between the repaired areas was not noticeable, we thinned the edges of the leather to achieve a seamless finish.

I think it’s turned out rather nicely.

At Union Works, we offer repair services not only for shoes but also for bags and leather accessories.
If you have any concerns, please do not hesitate to contact us.
Thank you for reading to the end.
Yokohama Branch, Yamada





