The one that’s been in the news recently?“NICKS BOOTS”
A boot manufacturer founded by Mr Nick Blachcuzyn, a former craftsman at WHITE’S
It was founded in 1964 and has a history stretching back over 50 years, but I must admit I didn’t know this until quite recently (embarrassing).
As you’d expect from a Whites product, the design and construction are almost identical to Whites’ own – these are undoubtedly the world’s finest boots☆
I wasn’t able to take a photo before the repair, but this time the customer asked us to make the heavy sole a little lighter.
This repair involves converting the Vibram #100, which originally had a double midsole, to a single midsole by removing one of the midsole layers.
As it’s just one midsole, it won’t make the shoes significantly lighter, but it will give them a slightly sleeker look and make them feel a bit lighter☆
I said it would be a simple matter to trim the midsole, but it’s actually a major repair job that requires re-welting!
This shows the shoe during the repair process: the welt has been reattached, the 5mm leather base and rubber midsole have been affixed, and the outseam stitching has been completed.
The method of attaching the welt and the way the nails are secured to the base are almost identical to those used by Whites, but according to one of our craftsmen who re-welted the shoes, the thread used to sew the welt was slightly finer than that used by Whites.
The outsole is Vibram #100, bonded to the rubber midsole and secured with screws☆
Although it is possible to apply outseams right down to the #100 sole, with this method of gluing and screw-fastening, it is highly likely that you will not need to replace the welt or the midsole the next time you have a full resole carried out.
Replacing the sole whilst reusing the midsole puts less strain on the boots and works out considerably cheaper.
*Depending on the condition, re-welting may be required.
As you brought these boots in when they were barely worn, they’ve turned out looking just like new.
The finish on the soles might actually be even better than the original WHITE’S (NICKS)!?
Those are some really cool boots, aren’t they? ☆
#100 Soles Whites – I might just go ahead and order a pair (lol)
*At Benchmark, we accept custom orders for Whites.
・http://unionworks.blog118.fc2.com/blog-entry-2244.html
・http://unionworks.blog118.fc2.com/blog-entry-2123.html
・http://unionworks.blog118.fc2.com/blog-entry-2088.html
(Cost of this repair)
・Rewelt: ¥10,800
・Full sole Vibram #100: ¥16,200
・Rubber midsole: ¥2,160
・5 mm leather base: ¥4,320

If you bring in your DM and your item for repair at the same time, you’ll receive a 10 per cent discount on the repair cost as many times as you like during this period☆
Please do make the most of this opportunity!
We send direct mail to customers who have already registered.
If you haven’t registered as a customer yet,HereYou can register here.
*We will send this to anyone who registers now around the time of the Obon holiday in August.
Please see below for further details on customer registration.
http://unionworks.blog118.fc2.com/blog-entry-2390.html
http://unionworks.blog118.fc2.com/blog-entry-2393.html
I imagine there are many of you who are too busy to visit our shop.
We are also more than happy to accept shoes sent directly to our factory for repair.
Repairs by post:https://www.union-works.co.jp/order/
Repair Menu:http://unionworksrepair.com/#!/
Online shopping:https://unionworks.stores.jp/#!/
Thank you very much☆
Morita Factory
