Whites Semi-Dress: Full Sole Replacement

Whites Semi-Dress: Full Sole Replacement

25 April 2018

Please note that all our shops will be closed today, Wednesday. ☆

IMG_5104.jpg 

WHITE’S BOOTS

A long-established American boot manufacturer with a history spanning over 140 years

There are many excellent, long-established boot manufacturers in the United States, such as Red Wing, Chippewa and Wesco.

Red Wing and Chippewa use the Goodyear welted construction method, whilst Wesco uses the stitch-down construction method,
The Whites are made using a construction method that combines the stitch-down technique with a welt.
Whilst every production method has its pros and cons, it is fair to say that Whites’ method is the most labour-intensive.

Due to the unique manufacturing process, replacing the sole is a difficult task and generally involves replacing the welt as well.

Let me explain this unique production method in detail☆

IMG_5107.jpg 

The sole is VIBRAM #430

The sole is quite thick and exceptionally durable, but the tread is worn down and most of the stitching has come undone.

IMG_5114.jpg 

The heel has been worn down quite a bit, right down to the layered leather.

Right then, let’s take it apart and have a look inside☆

 IMG_5144.jpg  

I removed the heel and sole completely.

IMG_5147_20180418105313f40.jpg 

This is a leather shank—it’s got a bit of a rugged look to it, doesn’t it? (laughs)

IMG_5149.jpg 

Is it because the shank wasn’t long enough that they’ve added an extension at the back?

Of course, there’s nothing wrong with how it works; these slightly rough edges are just part of the charm of work boots, aren’t they? ☆

 IMG_5158.jpgIMG_5157.jpg 

There was a piece of black leather on the underside of the shank—is this there to provide extra support for the arch of the foot?

The thick leather shank is another key feature of Whites; together with the Archies construction method, this is said to make them very comfortable to wear☆

IMG_5159.jpg 

The welt is set slightly off-centre; it is sewn onto the leather of the stitched-down upper.

It’s a completely different shape to the welt used in the Goodyear method, isn’t it? ☆

IMG_5161.jpgIMG_5162.jpg

The leather laid underneath is the new welt to be fitted; it is a single piece of leather.

I imagine that Whites probably use the same leather for the uppers, but as we do not, of course, have the same leather in stock, we will use leather of a similar colour.

It’s a completely different shape to the welt I removed—what could be the reason for this?

IMG_5164.jpgIMG_5166.jpgIMG_5169.jpg

I’ve sewn on the welt; I imagine this is the first time most of you have seen it like this☆

The white stitching is done using the ‘scoop stitch’ technique, and the extra-thick thread was specially twisted just for this purpose.

There is a reason for using such thick thread, but I’ll explain that later.

IMG_5168.jpg

The white thread visible on the inside is the thread used to sew the welt (using a running stitch).

Grooves are cut into the insole and the sole is sewn into them; in terms of the welted construction method, this is the same as the hand-sewn method.
(In the Goodyear welted construction method, a rib is attached and then stitched in place using a scoop stitch.)

This welt stitching secures the four components: the welt, the upper, the lining and the insole.

IMG_5167.jpg

Once the sole has been attached, you’ll need to fold the welt over as shown on the right before sewing the outseam.

IMG_5295_2018041810591439b.jpgIMG_5297.jpg

Here, after attaching the leather sole (5 mm thick) to the base and hammering in the nails, the shape of the shank is clearly visible thanks to the nails being driven in firmly.

By shaping the shank properly at this stage, you’ll achieve a nice curve in the outsole when you attach it at the end☆

IMG_5313.jpgIMG_5314.jpg

Skipping ahead a bit, here’s what it looks like once it’s finished

The outseam has been sewn beautifully☆

Only the inner stitches are sewn onto the welt; the outer stitches are sewn onto the upper only.

I sewed the outseam whilst pulling the welt taut, and once I had finished sewing, I trimmed the excess welt right up to the edge of the stitching.

The reason the welt has a nice, raised profile is because there is thread sewn into it using the scoop stitch; we use extra-thick thread to create this raised effect.

IMG_5315.jpg

The outsole is the same VIBRAM #430 as the original, and the heel is Quabaug.

It’s a bit hard to tell from this photo, but the arch of the foot is nicely defined☆

IMG_5316.jpgIMG_5318.jpgIMG_5321.jpgIMG_5322.jpg

The pitched heel has turned out beautifully too☆

IMG_5326.jpgIMG_5312.jpg

These Whites certainly make a statement, but they’re brilliant boots on the inside too☆

Because of their intricate construction, repairs are time-consuming and expensive, but I truly believe these are boots that will last a lifetime!!

The cost of this repair

・Rewelt ¥10,800
・Full sole: Vibram #430 Quabaug heel ¥18,360
・5 mm leather base: ¥4,320

Total: ¥33,480 (including tax)
Delivery time: from 1 month—


At Benchmark, we accept custom orders for Whites.
・
http://unionworks.blog118.fc2.com/blog-entry-2244.html
・http://unionworks.blog118.fc2.com/blog-entry-2123.html
・http://unionworks.blog118.fc2.com/blog-entry-2088.html

I imagine there are many of you who are too busy to visit our shop.

We are also more than happy to accept shoes sent directly to our factory for repair.

If you send us your DM now, you’ll get 10 per cent off the repair cost!

*Please note that, from the next issue onwards, we will only be sending direct messages to registered customers.

If you have yet to register as a customer, please visit our website atCUSTOMER REGISTRATIONPlease start from here.

Please click here for details on customer registration.

①http://unionworks.blog118.fc2.com/blog-entry-2390.html

②http://unionworks.blog118.fc2.com/blog-entry-2393.html

We apologise for any inconvenience this may cause, but we would be grateful if you could complete your registration.

How to Order:http://www.union-works.co.jp/contact/

Web Repair:
http://unionworksrepair.com/#!/

Online Shopping:
https://unionworks.stores.jp/#!/



Morita Factory