[ J.M.WESTON ] J.M. Weston 590 Triple-Sole Derby Half-Rubber + Vintage Steel

[ J.M.WESTON ] J.M. Weston 590 Triple-Sole Derby Half-Rubber + Vintage Steel

11 June 2025

Here’s what we’d like to introduce to you today.

J.M. WESTON 590 Full Brogue Derby Shoes.

Don’t you find the sole has a rather substantial feel to it?

And no wonder—it features a specially thickened design known as the ‘triple sole’.

The double outseam creates a step between the welt and the sole, resulting in a wider edge that lends the shoe a more imposing appearance.

Let’s take a look straight away.

The steel in the toe area of the sole may become warped, or

One screw has come loose.

The thick leather sole is stiff and slippery, so the toe area looks as though it’s wearing out rather quickly. Let’s have it replaced.

It looks as though the heel has been replaced with a quarter-rubber heel.

The original top piece is fitted with a steel component, andIt is exceptionally durable, but,

It seems they were replaced straight after I started wearing them because they were slippery.

As this is running low too, let’s replace it.

Well then, here is the finished result.

Half Rubber Soles & Vintage Steel Toes

We have reinforced it with a half rubber sole and vintage steel fittings.

By using rubber for both the sole and the heel, I believe the entire contact surface with the ground is now made of rubber, making the shoes less likely to slip.

It looks natural even when viewed from the side.

Let’s take a closer look.

The transition between the half-rubber and steel sections has a flat finish. It has been finished in such a way as to minimise any impact on walking comfort.

The connection between the half-rubber section and the outsole also has a natural finish.

It has been paper-cut to a thin thickness so that it is less conspicuous and less likely to peel off.

Rubber

I replaced the top piece with a 10mm-thick rubber heel. The original quarter rubber heel was about 8mm thick.

We trim the layered leather by approximately 2 mm to compensate for any discrepancies, ensuring the overall height remains unchanged.

I think you’ll be able to feel the difference in durability without any change to the balance.

On this occasion, we carried out the repair using rubber materials, with a focus on practicality.

Provided you don’t mind the change in appearance, I think it would be a brilliant reinforcement.

If you have any concerns, please do not hesitate to contact us.

We look forward to welcoming you all.

Thank you very much.

Aoyama Branch Amamoto