[HERMES] Hermès “Izmir” Sandals with half-rubber sole and rubber heel

[HERMES] Hermès “Izmir” Sandals with half-rubber sole and rubber heel

23 August 2023

 

Union Works is closed today, Wednesday.

Please be careful.

When it comes to Hermès men’s sandals, the Izmir is the one to beat.

 

For women’s wear, Oran is the go-to brand, isn’t it?

 

The standout feature is, without a doubt, the design of the upper.

The design, modelled on the brand’s initial ‘H’,

It wraps around the foot in a three-dimensional way, ensuring exceptional comfort.

 

The sole is a simple leather sole.

 

This time, the item was brought in for reinforcement before it was worn.

 

The front section and

 

We will reinforce the heel.

 

Here is the finished result.

 

Half Rubber Soles

First, the front section.

We have reinforced it with a half rubber sole.

 

With reinforced soles, suitable for both men and women

Popular with a wide range of people

This is a standard method of reinforcement.

 

As well as providing grip, you don’t need to have the sole completely replaced

By replacing the half-rubber sole,

You’ll be able to wear them for a long time.

 

The mid-sole features a half-rubber sole

It has been treated with a thin coating to prevent it from peeling off,

We have applied the stickers in such a way as to leave the brand logo visible.

 

A 5-millimetre rubber heel was fitted to the top of the heel.

 

The thin rubber sole attached to the front...

It is also possible to apply it over the entire surface to reinforce it, but

For the heel area, which is most prone to wear, rather than thin material,

Reinforcement using thick material is an effective method.

 

Let’s compare the side view with the one before the reinforcement.

 

First, here’s how it looked before the reinforcement.

 

Next, a side view after the reinforcement.

 

As a thin rubber sole has been attached to the front section,

We’ve managed to strengthen the team without the atmosphere changing all that much.

 

As the heel is fitted with a thick rubber heel,

The design has changed from a flat sole to one with a heel.

 

It would no longer be a flat-soled design, though

Not only does this significantly increase strength and substantially reduce the frequency of repairs, but

The shoes can be designed so that the rubber heels can be replaced whilst the shoes are being worn.

 

This time, I reinforced the soles before wearing them for the first time.

 

Reinforcement for attaching a heel to a flat sole is

Although the original design will change,

This is a highly recommended method of reinforcement.

 

I’d like to increase the strength, even if the design changes slightly.

We recommend this to anyone who wants to reduce the frequency of repairs.

Please do give it some thought.

 

If you have any queries,

Please do not hesitate to contact us.

 

We look forward to welcoming you all.

 

Thank you very much.

 

Aoyama Branch Nakata