[GUIDI] GUIDI: Zipper Replacement and Sole Repair

[GUIDI] GUIDI: Zipper Replacement and Sole Repair

26 December 2024

It’s the end of the year, isn’t it?

This year has flown by once again.

Every year, I make a list of things I want to do at the start of the year, but this year I’ve still got about half of them left to do.

It has been carried over to next year.

 

As a company, too, it looks as though the project we were unable to bring to fruition this year will finally come to fruition next year.

I’m really looking forward to it.

 

Right then, let’s move on to the repairs.

Centre-zip boots with colourful paintwork.

Apparently, it’s a collaboration between GUIDI and BEAMS.

I’m told the paintwork on the upper has been applied using a technique known as ‘dripping’, and,

As this technique does not produce the same pattern every time, each piece can truly be described as one-of-a-kind.

 

This job involves replacing the zip and repairing the sole.

 

First up, the zip—which looks like it’s going to be a bit of a job.

It’s a common problem with GUIDI zips (tapes) – they tend to tear quite easily.

This is probably because they use cotton tape, prioritising ease of dyeing, the ageing process and the overall look.

 

As you can see, the right foot needs replacing.

 

The tape on the left is intact, but the pull tab has been worn down and is in such a state that it could come off at any moment.

 

We have decided to replace the entire zip on the right leg and just the slider on the left.

 

As the process for replacing a zip is described in detail in a previous blog post, I shall omit it here.

Please do have a look if you’d like.

GUIDI Zipper Replacement

 

On this pair of boots, the paint had also got onto the zip.

If left as it is after replacement, the zip will stick out, so I’ll take a moment to sort it out.

 

Here’s what it looks like when it’s finished.

 

The colour of the tape has turned out rather nicely.

 

I’ve also given the sliders a touch of ageing and some subtle paintwork.

 

I don’t think it looks out of place when placed side by side, does it?

 

After the zip, we’ll move on to repairing the sole.

 

We’ll be carrying out repairs to the toe caps and top lifts.

 

Here is the finished result.

The edges have been given a rough finish to ensure they blend in well.

 

The top piece features Vibram TankLite.

Although the design is different, it is stronger than the original one.

Vibram Tank Lite

The top piece also has a rough-finished edge.

 

Both the zip and the sole have really settled in nicely.

I think it’s turned out rather well, hasn’t it?

 

At Union Works, we offer repair services not only for shoes but also for bags and leather accessories.

Please do feel free to get in touch.

 

We look forward to welcoming you.

 

Thank you very much for staying with us until the end.

 

Yokohama Branch, Yamada