Restock: Cheaney / Cap-toe & Punched Cap-toe in Black

Restock: Cheaney / Cap-toe & Punched Cap-toe in Black

5 February 2021

001 (2)

Our specially commissioned Chiny range is back in stock.

I requested changes to the last and the upper pattern,

It features a short nose and a round toe.

002 (2)

As I’ve mentioned this before, I’ll keep it brief.

First up, the cap-toe.

003 (2)

The main feature of this bespoke order is that the cap has been made smaller (shorter).

It’s only about 5 millimetres, but it makes a world of difference.

Compared to the previous version, it looks considerably smaller and is neatly put together, striking a good balance.

That’s what makes Cheeney so great – she always takes care of these sort of detailed requests properly.

One more point: the stitching next to the hole for threading the cord is not a swan neck, but

We have opted for the simple version.

009 (2)

The other pair are punched cap-toe shoes.

010 (2)

As this part features perforations, the balance was already good in its original position, so no changes were made.

As with the cap, orders are limited to those featuring the modified swan-neck stitching and the perforated cap style.

Both are rather austere models with minimal design elements, but,

I believe this is a design that really brings out the best in the characteristics of the wooden mould.

004 (2)

They share the same design, with the lining and sock sheet in green.

005 (2)

I’ve also had the sole made green.

There isn’t really any deeper meaning to this, but,

It’s quite rare to be able to choose colours like this, and I just thought, ‘That looks fun!’—that’s about it, really, but,

Whether by chance or design, it’s in the same colour scheme as the interior of the shop visible in the background.

(There’s a bit of green in it.)

008 (2)

I’ve digressed a bit, but,

Chiny is known for her neat and consistent work.

The stitch spacing along the welt is consistent, and

The distance from the upper is also even.

The outsole has also been trimmed in such a way as to leave a certain amount of margin around the stitching, and,

If you really think about ‘using’ it, a finish like this is

It makes it easier to deal with repeat repairs and provides peace of mind.

When it comes to stitching, the focus is often on the fineness of the stitch, but,

I do think that there are cases where it is not necessarily true that the more detailed something is, the better.

Bearing in mind that you’ll be using them for a while, and that they’ll need to be re-stitched when the soles are replaced,

There is also a view that a less fine weave makes it easier to use the same welt repeatedly.

Furthermore, if the stitching is too fine on a rubber sole, there is a risk that the rubber may tear.

The point is that there isn’t just one answer.

I think it is important to consider whether it has been designed in line with its purpose and intent.

007 (2)

006 (2)

The tucking of the upper (particularly where the upper meets the welt), etc.,

You can really sense that they are striving to craft their pieces with care, whilst working within the limits of the materials they use.

It would be a shame if the leather were to crack because you’d pushed it too hard.

At worst, the sole can be replaced, but the same cannot be said for the upper.

Furthermore, the finish on the edges is neither too heavily sanded nor rough, and

I haven’t gone out of my way, but I’ve finished it neatly.

It’s not a question of forcing in flashy techniques, but rather,

My impression is that they place great importance on the fundamentals when it comes to creating the products they use.

013 (2)

It’s turned into a bit of an over-the-top praise fest, but,

As it is one of the shoe manufacturers you can rely on,

I thought I’d try to explain that point.

I said a moment ago that there is not just one answer, but,

I imagine there are all sorts of ways to go about choosing shoes.

The make, the design, whether they fit, the price, and so on.

I think the ‘right’ answer depends on what you prioritise and how you view the situation.

With so much information available, you may find yourself feeling a bit overwhelmed, but,

I hope you’ll find a specimen that you’re happy with.

Joseph Cheaney

Dingley (Cap Toe)

Wiberston (Punched Cap Toe)

¥71,000 + VAT

If anyone is interested, please do give it a go.

Shinjuku Branch Hanada