Union Wrist Watch ☆ 2

Union Wrist Watch ☆ 2

6 July 2018

 
The most important case is the military-style hairline (matt finish)

DSCN5659.jpg 

I wanted to keep the case diameter as small as possible, and it eventually settled at around 37 millimetres.
                    *Excluding the crown

I wanted to create a watch that was modest in size and didn’t stand out too much.

        
DSCN5660.jpg

One thing we decided right from the start of the project was to use Arabic numerals for the index, and

Two reasons for opting for a small seconds hand.

The font used for the numerals and the position of the small seconds hand
DSCN5662.jpg

The size of the ▲, and how cleanly the 5 and 7 are cut

DSCN5668.jpg

Colour of the luminescent material, shape of the hands

DSCN5664.jpg

The indentation on the second hand of the Smoseco (the indented, spiral-shaped part) etc…

  We created samples and made repeated revisions, gradually bringing them closer to our ideal.

As mechanical watches tend to be expensive, I decided to go for a quartz movement, but

I’m finding it rather difficult to find anything that fits perfectly,

In the end, we managed to pass the test by making some adjustments to the Japanese-made movement.

Further details are a trade secret☆

DSCN5656.jpg

The windscreen is made of mineral glass.

Something with a sharp curve at the edge and a flat top.

DSCN5665.jpg

DSCN5658.jpg

The crown is of medium size and has a polished finish

I’ve adjusted the balance of the needle.

DSCN5669.jpg

DSCN5673.jpg 

As it is a spring bar type with a strap width of 20 mm, it is not limited to NATO straps alone,

You can use it with a leather belt too!

DSCN5671.jpg  

Mil-Spec items are stamped with a serial number and size

It features a secure screw-back closure to keep the contents safely protected.

Available in two colours: black and white

DSCN5662.jpg 

A white verging on ivory… This colour really took me ages to get right.

There are 70 limited-edition black models and 30 limited-edition white models.

The price is¥37,000 + VAT (¥39,960)That is correct.

Even if you’ve just started your first job, you can afford one if you make a bit of an effort☆

We immediately issued them to the young staff in the shop.

DSC_6200.jpg   

I know I’m blowing my own trumpet, but I think it’s turned out rather well, don’t you think? ☆

DSC_6182.jpg 

All Union Works branches,WEBWe will, however, be selling them.

I look forward to working with you.

I bought one straight away – Aoki Factory