
[Christian Dior] Dior Shoulder Bag: Strap Making
[Christian Dior] Dior Shoulder Bag: Strap Making
26 March 2026
- CATEGORY
- DIOR
- BAG & OTHER ITEMS REPAIR
Today’s repair feature is:DIORIt is a shoulder bag.

As this model has a rather unusual design, I’ll start by explaining the structure of the strap.
At first glance, the left and right sides appear to be separate straps.
However, when you open the flap, you’ll see that it’s actually made up of a single strap.

As it is secured by the loops positioned on either side, the strap will not slip out of place.

Furthermore, each end is fitted with a spade terminal, and
It is designed to be inserted into the hole on the opposite side to secure it in place.



There are additional holes in the strap, allowing you to adjust its length.
That’s quite an interesting design, isn’t it?
Now, as those of you with a keen eye may have noticed, the part being repaired this time is the strap.
The strap has a three-layer structure, consisting of two layers of leather bonded together with a reinforcing material sandwiched between them.
Over time, the adhesive had weakened, causing the material to peel away from one end to the other.


As the leather of the strap itself was also showing signs of wear, we were asked to make a brand-new one on this occasion.
With a focus on preventing recurrence, we will manufacture the product using a stitching method.
Right then, here are the steps involved.
First, glue together two strips of leather cut into long, narrow strips, sandwiching a reinforcing material between them.
We then shape it to match the original.

After colouring the edge and polishing it carefully, stitch all the way round the outer edge.

At this stage, the strap itself is almost finished.


Finally, fit the terminal and drill several holes in the same positions as on the original.


Finally, secure it to the underside of the flap, and you’re done.
Here is the finished result.


The stitching blends in naturally, resulting in a finish that looks completely seamless.
This means you won’t have to worry about it peeling off.


The edges are also beautifully finished.

Of course, just like the original, the length can be adjusted.


I think it’s turned out rather well, hasn’t it?

At Union Works, we offer repair services not only for shoes but also for bags and leather accessories.
Please do feel free to get in touch.
Thank you for reading to the end.
Yokohama Branch, Yamada





