Caring for Leather Shoes

Caring for Leather Shoes

31 January 2020

I’ve been getting the odd question here and there about how best to look after leather shoes.

There are no set rules for maintenance, and methods vary from person to person, but

In this article, we’ll be introducing some standard care methods.

IMG_9716.jpg      

These are a pair of John Lobb side-gore boots that we have taken in for polishing.

Apparently, she used to wear them a lot, but her tastes changed and she’d left them to one side for a while.

IMG_9717.jpg

On closer inspection, the leather has dried out and turned a whitish colour.

No matter how good the leather is, you mustn’t leave it to dry out.

Let’s make sure we look after it properly.

First, use a brush to remove any dirt or dust that has accumulated.

Next, I set about removing any dirt and old cream.

IMG_9718.jpg

Here, I’m using Boot Black’s Two-Face Plus Lotion.

As this product can remove both water-based and oil-based stains, you can remove most light stains with just this one product.

Apply a suitable amount to a cloth and gently wipe away the dirt.

IMG_9719.jpg

The dirt and old cream that had built up on the surface came off, leaving it feeling fresh and clean.

As the leather was dry this time, the next step is to moisturise it.

IMG_9720.jpg

Here, we use a moisturising cream from Moubray that contains more moisture.

This cream contains an ingredient called lanolin.

Lanolin is characterised by its high moisturising and softening properties.

It penetrates deeply to moisturise the leather, protecting it from drying out and cracking.

It is a well-known ingredient that is also used in cosmetics and the like.

IMG_9721.jpg

You can use a brush or a cloth, but this time we’ll use our fingers to blend it in.

Apply a little extra along the creases where the shoes have worn. (I’m not sure if applying more actually makes it more effective—it’s probably just a psychological thing. Haha.)

IMG_9722.jpg

It’s hard to tell from the photo, but it has regained its moisture and has a plump, supple texture.

Next, it’s finally time to add the cream.

IMG_9723.jpg

This time, I used Saphir Noir’s cream.

Essentially, creams from all manufacturers are made up of three main ingredients.

They are ”water”, ”oil” and ”wax”. This is what is known as emulsifiability.

Whilst there are differences in the specific ingredients and their proportions between manufacturers and products, broadly speaking, there are these three.

It doesn’t really matter which cream you use. Please choose whichever you prefer.

In this context, the cream we’ll be using this time is an oil-based cream.

In other words, it contains no water.

Compared to the natural finish of an emulsifying cream, it provides a more radiant sheen.

Furthermore, as the complementary colour effect is strong, the result looks very attractive.

This cream goes really well with smart shoes, and it’s one of my personal favourites.

As before, work this in with your fingers.

Many people think it’s best to apply a generous amount here, but

It’s enough to apply it in a thin, even layer.

In my case, I spread a quantity equivalent to about five or six grains of rice over one foot.

IMG_9724.jpg

I spread the cream in a thin layer.

IMG_9726.jpg

IMG_9730.jpg

Next, use a boar-bristle brush to blend the cream evenly into the skin.

IMG_9732.jpg

Even just doing this gives it quite a bit of shine, but

IMG_9733.jpg
Finally, use a horsehair brush to remove any excess cream.

(Using a goat-hair brush for the finishing touches will give it an even greater shine, but a horsehair brush is perfectly adequate.)

IMG_9736.jpg


And here are the finished shoes.

Compared to before polishing,

IMG_9716.jpg

Before

IMG_9736.jpg

After

The leather, which had become dry and whitish, has regained its original black colour, lustre and suppleness.

Leaving it to dry out can cause it to crack, so we recommend regular care.

The care products featured here are available at all Union Works branches, so please do give them a try.

Of course, we are also happy to undertake polishing work, so please do not hesitate to ask.

・Polish: from ¥1,100

Thank you very much.

Yokohama Branch Shin