[ALDEN] Repairing Tears in Alden Cordovan Leather

[ALDEN] Repairing Tears in Alden Cordovan Leather

17 October 2024

Alden’s classic model: the cordovan chukka boot

We receive so many requests that I sometimes wonder if we’re carrying out repairs every single day☆

 

Here’s the part that needs repairing this time: the base of the blade (the tang) has split (sob).

Although Cordovan is said to be three times as durable as cowhide, I imagine the strap loops—which bear a heavy load—often tear.

If left as it is, the tear will get bigger, so let’s have it repaired as soon as possible.

 

First, carefully cut and undo the stitches holding the feathers in place.

 

I’ve finished unpicking it; now the underside of the tear is visible too.

 

This black circle is a piece of material made by bonding nylon tape to a leather patch; it is used to reinforce the torn section.

 

Insert the reinforcement material between the upper and the lining.

 

This is what it looks like from the inside (lining side); we’ll then bond it firmly so that the tear closes up.

 

Once it is firmly stuck down, sew it on with a sewing machine.

 

I sewed in a zigzag pattern, as if straddling the tear, so that the tear would close.

This has firmly reinforced the torn section, ensuring it won’t come apart.

 

Finally, sew back on the feather you removed earlier, and it’s finished.

 

As the tear was within the area covered by the feathers this time, the repair marks were completely concealed and had virtually no impact on the appearance☆

 

If you lift the flap, you’ll see the top half of the zigzag stitching, but it shouldn’t be a cause for concern☆

 

Now you can wear them with confidence, can’t you? ☆

As this is something you won’t realise until you spread the wings, I imagine many people wear them without even noticing.

As they tend to tear quite often, I would recommend checking them from time to time.

 

Thank you very much☆

 

We also offer a repair service via post; we look forward to hearing from you.

https://www.union-works.co.jp/order_delivery/

Morita Factory